Minimum Order Quantity | 1 Piece |
Brand | ALL BRAND |
Display Range | -200 to 1600 deg c |
Supply | 230 V AC |
Mounting Type | ALL AREA |
Calibration | WITH CALIBRATION CERTIFICATE |
Features:
MODEL | MCO-25 |
Dimension (HxWxD) mm | 72 X 72 X 75 |
Panel Cutout (mm) | 68 X 68 |
Display | Blind Controller |
INPUT | |
Sensor | J |
Range | J (0ºC TO 400ºC) |
OUTPUT | |
Control Output | 1 C/O, 5A, 230V AC |
Relay Ratings | 12 V DC approx |
SPECIFICATION | |
Setting | by knob |
Set Point | 1 - Set Point |
Control Action | Time Proportional (TP) / ON-OFF (Factory set) |
Operating Mode 1 | HEAT Mode |
Resolution | 1ºC Fix |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50 HZ |
Indication | LED to Indicate Relay Status |
Sensor Break | |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MCO-45 |
Dimension (HxWxD) mm | 48 X 48 X 70 |
Panel Cutout (mm) | 44 X 44 |
Display | Blind Controller |
INPUT | |
Sensor | J |
Range | J (0ºC TO 400ºC) |
OUTPUT | |
Control Output | 1 C/O, 5A, 230V AC |
Relay Ratings | 12 V DC approx |
SPECIFICATION | |
Setting | by knob |
Set Point | 1 - Set Point |
Control Action | Time Proportional (TP) / ON-OFF (Factory set) |
Operating Mode 1 | HEAT Mode |
Resolution | 1ºC Fix |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50 HZ |
Indication | LED to Indicate Relay Status |
Sensor Break | |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | PI -11B/11 |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 x92 |
Display | Single Display: 7 segment, 4 digit, 0.56” RED LED display. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC / DC, 50 / 60Hz, SMPS |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -11B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -11 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
MODEL | PI -21B/21 |
Dimension (HxWxD) mm | 72 x 72 x 60 |
Panel Cutout (mm) | 68 x 68 |
Display | Single Display: 7 segment, 4 digit, 0.56” RED LED display. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC / DC, 50 / 60Hz, SMPS |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -21B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -21 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
MODEL | PI -38B/38 |
Dimension (HxWxD) mm | 48 x 96 x 75 |
Panel Cutout (mm) | 44 x 92 |
Display | Single Display: 7 segment, 4 digit, 0.8” RED LED display. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230 V AC, ±10 %, 50 Hz (linear power supply) |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -38B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -38 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
*Your information is safe with us.
MODEL | PI -31B/31 |
Dimension (HxWxD) mm | 48 x 96 x 67 |
Panel Cutout (mm) | 44 x 92 |
Display | Single Display: 7 segment, 4 digit, 0.8” RED LED display. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC / DC, 50 / 60Hz, SMPS |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -31B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -31 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
MODEL | PI -41B/41 |
Dimension (HxWxD) mm | 48 X 48 X 70 |
Panel Cutout (mm) | 44 x 44 |
Display | Single Display: 7 segment, 4 digit, 0.4” RED LED. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC / DC, 50 / 60Hz, SMPS |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -41B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -41 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
MODEL | PI -54B/54 |
Dimension (HxWxD) mm | 38 X 62 X 80 |
Panel Cutout (mm) | 31 x 54 |
Display | Single Display: 7 segment, 4 digit, 0.4” RED LED. |
SPECIFICATION | |
Resolution | 1 / 0.1 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230 V AC, ±10 %, 50 Hz (linear power supply) |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI -54B |
Input Signal | 0-10 V DC / 4 -20 mA DC (Configurable) |
Range | 0 to 9999 (Configurable) |
MODEL | PI -54 |
Input Signal | 0 -10 V DC / 0 - 20 mA DC / 4 - 20 mA DC (Configurable) |
Range | - 999 to 9999 (Configurable) |
Extra Features | Correction factor, Offset Filtration rate, Range Decimal point selectable, Reverse scaling possible. |
*Your information is safe with us.
MODEL | MDT-1310 (Q-I) |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92X92 |
Display | Single Display: 7 segment, 3 digit, 0.56”, RED LED display |
Time setting | By THUMBWHEEL Switch |
Counting direction | Up / Down (Factory Set) |
Range Setting | 3D = 99.9 / 999 min/sec Configurable by Dip Switch |
OUTPUT | |
Control output | 1 - Relay or SSR (Factory set) |
Relay Rattings | 2 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Indication | LED for Relay Status Indication |
Start counting time | Starts on with power supply |
Operating Mode | Delayed ON / Instant ON (Factory set) |
Reset Facility | By Front Keypad |
Power Supply | 230 V AC, 50 Hz (Linear Power Supply) |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MDT-2312 (Q-II) |
Dimension (HxWxD) mm | 72 X 72 X 60 |
Panel Cutout (mm) | 68X68 |
Display | Single Display: 7 segment, 3 digit, 0.56”, RED LED display |
Time setting | By THUMBWHEEL Switch |
Counting direction | Up / Down (Factory Set) |
Range Setting | 3D = 99.9 / 999 min/sec Configurable by Dip Switch |
OUTPUT | |
Control output | 1 - Relay or SSR (Factory set) |
Relay Rattings | 2 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Indication | LED for Relay Status Indication |
Start counting time | Starts on with power supply |
Operating Mode | Delayed ON / Instant ON (Factory set) |
Reset Facility | By Front Keypad |
Power Supply | 230 V AC, 50 Hz (Linear Power Supply) |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
Model | *MDT-4310 (Q-III) |
Dimension (HxWxD) mm | 48 X 48 X 102 |
Panel Cutout (mm) | 44X44 |
Display | Single Display: 7 segment, 3 digit, 0.4”, RED LED display |
Time setting | By THUMBWHEEL Switch |
Counting direction | Up / Down (Factory Set) |
Range Setting | 3D=9.99/99.9/999min sec Dip Switch Configurable by Dip Switch |
Output | |
Control output | 1 - Relay or SSR (Factory set) |
Relay Rattings | 2 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Specification: | |
Indication | LED for Relay Status Indication |
Start counting time | Starts on with power supply |
Operating Mode | Delayed ON / Instant ON (Factory set) |
Reset Facility | By Front Keypad |
Power Supply | 90 - 270V AC, 50/60 Hz,SMPS |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | MS-5708 |
Dimension (HxWxD) mm | 192 X 96 X 140 |
Panel Cutout (mm) | 188X92 |
Display | 7 segment, 4 digit, 0.56” LED display - Process Value. 7 segment, 2 digit, 0.56” LED display- Channel Number. 7 segment, 1 digit, 0.56” LED display- Process Status. |
INPUT | |
Input Signal | J / K / PT-100 2W / 3W / 0-10V DC / 4-20mA AC (Factory set) |
Range | 4~20mA 0-10VDC - (0 to 9999), Thermocouple (J 600°C, K 1200°C), RTD PT-100 2W / 3W (-99°C to 400°C) |
OUTPUT | |
Control Output | 6 or 8 - (Relay / SSR / Buzzer) |
Relay | Relay : 1 C\O, 5A, 230V AC ( for 6 channel input), SSR Buzzer: 12V DC |
PC communication | RS- 232 interface communication |
SPECIFICATION | |
Scan time | 2 to 99 sec. (Configurable) |
Application | Process signal scanning controlling process |
Grouping of channel | Maximum 4 groups of channels can be set |
Programmable parameter | VFY : For verifying program |
AUTO / MANUAL : For scanning into auto or manual mode SCAN TIME : Time for scanning input channel INC / DEC : For increasing or decreasing the value of the parameter SKIP : For skipping / unskipping the channel RUN : For running the programm | |
AL-1, AL-2 : For setting low alarm high alarm for each channel | |
Program mode | RUN Mode / AUTO-MAN Mode / VFY Mode / PROGRAM Mode |
Resolution | 4-20 mA, 0-10V DC, RTD 1/0.1 (Factory set) |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC/DC, 50/60 Hz, SMPS |
Indication | 16 LED for Relay Status Indication (for HIGH / LOW Alarm) |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MI-73 |
Dimension (HxWxD) mm | 70 X 60 X 110 |
Panel Cutout (mm) | Din Rail |
Features | Single Input - Single Output Single Input - Dual Output |
Isolation Type | Optical Type, 3 way (Input - Output, Output - Supply, Input - Supply) 1.2 kVA |
INPUT | |
Input Signal | 0-20mA / 4-20mA / 0-10V DC / -10 to 10V DC / 0 to 300V DC / 0 to 300V AC / Resistance 2W or 3W Port / Any range in mV DC J / K/ PT-100 2W / 3W |
OUTPUT | |
Control output | 0-20mA / 4-20mA / 0-10V DC ( Single or Dual Output) (Factory Set) |
SPECIFICATION | |
Accuracy | ±0.5% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | CC-12 |
Dimension (HxWxD) mm | 96X96X50 |
Panel Cutout (mm) | 92X92 |
Display | Upper : 7 segment, 4 digit, 0.56”, RED LED display - Process Value Lower : 7 segment, 4 digit, 0.4”, GREEN LED display - Set Value |
INPUT | |
Input Signal | 10 Input Potential Free Contact |
OUTPUT | |
Control output | 3-Relay |
Relay Ratings | 2 (NO-C) Contact for Audio and Visual Alarm, 1 C/O for Machine Trip |
SPECIFICATION | |
Power Supply | 90 - 270V AC / DC, 50 / 60 Hz, SMPS |
Indication | 1) Audio alarm 2) Visual alarm 3) Machine output |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | MFC-3006 |
Dimension (HxWxD) mm | 48 X 96 X 120 |
Panel Cutout (mm) | 44 x 92 |
Display | Single Display: 7 segment, 6 digit, 0.4”, RED LED display- Total Flow |
Lower : 7 segment, 4 digit, 0.4”, GREEN LED - Flow Rate | |
INPUT | |
Input Signal | 4-20 mA DC / 0-10V DC / Pulse (Factory Set) |
SPECIFICATION | |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Metal |
MODEL | DIN- 63 |
Dimension (HxWxD) mm | 76 X 27 X 116 |
Panel Cutout (mm) | DIN RAIL Mounting |
Display | Single Display: 7 segment, 3 digit, 0.4”, RED LED display |
Time setting | By THUMBWHEEL Switch |
Counting direction | Up / Down (Factory Set) |
Range Setting | 3D=9.99/99.9/999min sec Dip Switch Configurable by Dip Switch |
OUTPUT | |
Control output | 1 - Relay or SSR (Factory set) |
Relay Rattings | 2 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Indication | LED for Relay Status Indication |
Start counting time | Starts on with power supply |
Operating Mode | Delayed ON / Instant ON (Factory set) |
Reset Facility | By Front Keypad |
Power Supply | 90 - 270V AC, 50/60 Hz,SMPS |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MDT-1300 |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 X 92 |
Display | Single Display: 7 segment, 2 or 3 digit, 0.56”, RED LED display |
Time setting | “2D=9.9/99 Sec/Min. (Factory Set), 3D = 99.9/999 Sec/Min (Factory Set)” |
OUTPUT | |
Relay Rattings | 2C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Time Setting | By Thumb Wheel Switch |
Counting Direction | Up / Down (Factory set) |
Set Point | Single Set Point |
Operating Mode | Delayed On/ Instant ON (Factory set) |
Power Supply | 230V AC ±10%, 50 Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | MDT-3300 |
Dimension (HxWxD) mm | 48 X 96 X 85 |
Panel Cutout (mm) | 44 X 92 |
Display | Single Display: 7 segment, 2 or 3 digit, 0.56”, RED LED display |
Time setting | “2D=9.9/99 Sec/Min. (Factory Set), 3D = 99.9/999 Sec/Min (Factory Set)” |
OUTPUT | |
Relay Rattings | 2C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Time Setting | By Thumb Wheel Switch |
Counting Direction | Up / Down (Factory set) |
Set Point | Single Set Point |
Operating Mode | Delayed On/ Instant ON (Factory set) |
Power Supply | 230V AC ±10%, 50 Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MDT-2300 |
Dimension (HxWxD) mm | 72 X 72 X 60 |
Panel Cutout (mm) | 68 X 68 |
Display | Single Display: 7 segment, 2 or 3 digit, 0.56”, RED LED display |
Time setting | “2D=9.9/99 Sec/Min. (Factory Set), 3D = 99.9/999 Sec/Min (Factory Set)” |
OUTPUT | |
Relay Rattings | 2C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Time Setting | By Thumb Wheel Switch |
Counting Direction | Up / Down (Factory set) |
Set Point | Single Set Point |
Operating Mode | Delayed On/ Instant ON (Factory set) |
Power Supply | 230V AC ±10%, 50 Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C to 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | CC-11 |
Dimension (HxWxD) mm | 96X96X50 |
Panel Cutout (mm) | 92X92 |
Display | Single Display: 7 segment, 4 digit, 0.56”, RED LED display |
INPUT | |
Input Signal | 10 Input Potential Free Contact |
OUTPUT | |
Control output | 3-Relay |
Relay Ratings | 2 (NO-C) Contact for Audio and Visual Alarm, 1 C/O for Machine Trip |
SPECIFICATION | |
Power Supply | 90 - 270V AC / DC, 50 / 60 Hz, SMPS |
Indication | 1) Audio alarm 2) Visual alarm 3) Machine output |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | LPT-63 |
Dimension (HxWxD) mm | 76 X 27 X 116 |
Panel Cutout (mm) | DIN RAIL |
INPUT | |
Input Signal | J, K, PT-100 2W/3W (-50°C to 400°C) (Factory set) |
OUTPUT | |
Control output | 4-20mA DC signal (2 Wire System) |
Load output | 6.5V loop drop allows 750Ω load @ 24V DC |
SPECIFICATION | |
Accuracy | ±0.5% of FSD |
Power Supply | 24V DC Loop powered |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | LPT-45 |
Dimension (HxWxD) mm | Diameter: 45 mm |
Panel Cutout (mm) | HEAD Mounting |
INPUT | |
Input Signal | J, K, PT-100 2W/3W (-50°C to 400°C) (Factory set) |
OUTPUT | |
Control output | 4-20mA DC signal (2 Wire System) |
Load output | 6.5V loop drop allows 750Ω load @ 24V DC |
SPECIFICATION | |
Accuracy | ±0.5% of FSD |
Power Supply | 24V DC Loop powered |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | TC-19AL |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 X 92 |
Display | Single Display: 7 segment, 4-Digit, 0.56”, RED LED |
INPUT | |
Sensor | J / K / PT-100 2W/3W (Factory Set ) |
Range | J(0ºC to 400ºC 0ºC to 600ºC), K(0ºC to 1200ºC), PT-100 2W/3W((0ºC to 400ºC, - 50.0ºC to 200.0ºC) |
OUTPUT | |
Control Output | 1C/O, 5A, 230V AC |
Relay Ratings | 24 V DC APPORX |
SPECIFICATION | |
Set Point | 1 - Set Point |
Control Action | Time Proportional / ON-OFF (Factory Set) |
Operating Mode 1 | HEAT + ADVANCE ALARM |
Resolution | “J K - 1°C Fix, PT 100 2W/3W - 0.1°C/1°C “ |
Accuracy | ±1% of FSD |
Power Supply | 230V AC, ±10%, 50Hz |
Indication | Relay turns OFF in case of sensor break |
“OPEN” message display for sensor break LED for relay status Indication | |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | TC-192 |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 X 92 |
Display | Single Display: 7 segment, 4-Digit, 0.56”, RED LED |
INPUT | |
Sensor | J / K / PT-100 2W/3W (Factory Set ) |
Range | J(0ºC to 400ºC 0ºC to 600ºC), K(0ºC to 1200ºC), PT-100 2W/3W((0ºC to 400ºC, - 50.0ºC to 200.0ºC) |
OUTPUT | |
Control Output | 1C/O, 5A, 230V AC |
Relay Ratings | 24 V DC APPORX |
SPECIFICATION | |
Set Point | 1 - Set Point |
Control Action | Time Proportional / ON-OFF (Factory Set) |
Operating Mode | HEAT + COOL |
Resolution | “J K - 1°C Fix, PT 100 2W/3W - 0.1°C/1°C “ |
Accuracy | ±1% of FSD |
Power Supply | 230V AC, ±10%, 50Hz |
Indication | Relay turns OFF in case of sensor break |
“OPEN” message display for sensor break LED for relay status Indication | |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PIC-1101 |
Dimension (HxWxD) mm | 96 X 96 X 100 |
Panel Cutout (mm) | 92 X 92 |
Display | Single display : 7 segment, 4 digit, 0.56”, RED LED display. |
INPUT | |
Sensor | 0~10 V DC / 0-20mA / 4~20 mA (Factory Set) |
Range | 0 - 9999 (Configurable) |
OUTPUT | |
Control Output | 1 - (Relay / SSR / Buzzer) |
Relay Ratings | 1 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Retransmission | 4 - 20 mA / 0 - 10V DC (Factory Set) |
Excitation | 24 V DC |
SPECIFICATION | |
Set Point | 1 or 2 - Set point (Factory Set) |
Control Action | ON-OFF |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230 V AC, ±10 %, 50 Hz (Linear Power Supply) |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PIC - 3102(H) |
Dimension (HxWxD) mm | 48 X 96 X 120 |
Panel Cutout (mm) | 44 X 92 |
Display | Single display : 7 segment, 4 digit, 0.56”, RED LED display. |
INPUT | |
Sensor | 0~10 V DC / 0-20mA / 4~20 mA (Factory Set) |
Range | 0 - 9999 (Configurable) |
OUTPUT | |
Control Output | 1 - (Relay / SSR / Buzzer) |
Relay Ratings | 1 C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Retransmission | 4 - 20 mA / 0 - 10V DC (Factory Set) |
Excitation | 24 V DC |
SPECIFICATION | |
Set Point | 1 or 2 - Set point (Factory Set) |
Control Action | ON-OFF |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230 V AC, ±10 %, 50 Hz (Linear Power Supply) |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | PIC-3004 |
Dimension (HxWxD) mm | 130 X 235 X 50 |
Panel Cutout (mm) | |
Display | Single Display: 7 segment, 4 digit, 4 1/2”, RED LED display |
INPUT | |
Input 1 | 0-10V DC / 4-20mA / 0-20mA (Configurable) Programmable / DP (Configurable) |
Input 2 | Pulse - Through Encoder / Proximity |
Range | 0 - 9999 |
OUTPUT | |
Control Output | 2 Relay for Alaram |
Relay Ratings | 1C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Excitation | 24V DC |
Extra Features | |
SPECIFICATION | |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10 %, 50 Hz (linear power supply) / SMPS |
Protection | Relay turns OFF in case of sensor break |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | UTI-3004 |
Dimension (HxWxD) mm | 130 X 235 X 50 |
Display | Single Display: 7 segment, 4 digit, 2.25”, RED LED display |
INPUT | |
Input Signal | J / K / PT-100 2W/3W (Configurable) |
Range | J(0ºC to 600ºC), K(0ºC to 1200ºC), PT-100 2W/3W ( 0ºC to 400 ºC, - 99.9ºC to 400.0ºC) |
Output | 2 Relay for Alaram |
SPECIFICATION | |
Resolution | J K 1ºC, PT-100 2W / 3W 1ºC / 0.1ºC |
Accuracy | ±1% of FSD |
Power Supply | 90 - 270V AC / DC, 50 / 60Hz, SMPS |
Indication | “OPEN” message is displayed if the sensor is disconnected |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MFC-1046 |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 x 92 |
Display | Upper: 7 segment, 6 digit, 0.4”, RED LED display -Total Flow |
Lower : 7 segment, 4 digit, 0.4”, GREEN LED - Flow Rate | |
INPUT | |
Input Signal | 4-20 mA DC / 0-10V DC / Pulse (Factory Set) |
OUTPUT | |
Retransmission | 4-20 mA / 0-10V DC (Factory Set) |
Relay | 1C/O, 5A, 230V AC |
Excitation | 24V DC |
SPECIFICATION | |
Memory Retention | Non-Volatile Memory in case of Power Failure ( For Total Flow) |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | MFC-1049 |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 x 92 |
Display | Upper: 7 segment, 9 digit, 0.3”, RED LED display - Total Flow |
Lower : 7 segment, 4 digit, 0.4”, GREEN LED - Flow Rate | |
INPUT | |
Input Signal | 4-20 mA DC / 0-10V DC / Pulse (Factory Set) |
OUTPUT | |
Retransmission | 4-20 mA / 0-10V DC (Factory Set) |
Relay | 1C/O, 5A, 230V AC |
Excitation | 24V DC |
SPECIFICATION | |
Memory Retention | Non-Volatile Memory in case of Power Failure ( For Total Flow) |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MFC-2046 |
Dimension (HxWxD) mm | 72 X 72 X 85 |
Panel Cutout (mm) | 68 x 68 |
Display | Upper: 7 segment, 6 digit, 0.4”, RED LED display - Total Flow |
Lower : 7 segment, 4 digit, 0.4”, GREEN LED - Flow Rate | |
INPUT | |
Input Signal | 4-20 mA DC / 0-10V DC / Pulse (Factory Set) |
OUTPUT | |
Retransmission | 4-20 mA / 0-10V DC (Factory Set) |
Relay | 1C/O, 5A, 230V AC |
Excitation | 24V DC |
SPECIFICATION | |
Memory Retention | Non-Volatile Memory in case of Power Failure ( For Total Flow) |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MS-1208N |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92X92 |
Display | 7 segment, 4 digit, 0.56” LED display- Process Value. 7 segment, 3 digit, 0.56” LED display- Channel Number. |
INPUT | |
Input Signal | J / K / PT-100-2W / 3W (Configurable) |
Range | Thermocouple (J 600°C, K 1200°C), RTD PT-100 2W / 3W (-99°C to 400°C) |
OUTPUT | |
Control Output | Only Indicator |
PC communication | RS- 485 ModBus communication |
SPECIFICATION | |
Scan time | 2 to 99 sec. (Configurable) |
Application | Process signal scanning indication |
Grouping of channel | Offset Factor 0 to 25°C ( for each channel) |
AUTO / MANUAL : For scanning into auto or manual mode SCAN TIME : Time for scanning input channel INC / DEC : For increasing or decreasing the value of the parameter SKIP : For skipping / unskipping the channel RUN : For running the programm | |
Program mode | RUN Mode / AUTO-MAN Mode / VFY Mode / PROGRAM Mode |
Resolution | PT-100 2W/3W - DP Selectable |
Accuracy | ±1% of FSD |
Power Supply | 90-270V AC/DC, 50/60 Hz, SMPS |
Indication | 8 LED Indicates no. of channel |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | PI -54B/54 |
Dimension (HxWxD) mm | 38 X 62 X 80 |
Panel Cutout (mm) | 31 x 54 |
Features | Single Input - Single Output Single Input - Dual Output |
Isolation Type | Optical Type, 3 way (Input - Output, Output - Supply, Input - Supply) 1.2 kVA |
INPUT | |
Input Signal | 0-20mA / 4-20mA / 0-10V DC / -10 to 10V DC / 0 to 300V DC / 0 to 300V AC / Resistance 2W or 3W Port / Any range in mV DC J / K/ PT-100 2W / 3W |
OUTPUT | |
Control output | 0-20mA / 4-20mA / 0-10V DC ( Single or Dual Output) (Factory Set) |
SPECIFICATION | |
Accuracy | ±0.5% of FSD |
Power Supply | 90-270V AC / DC, 50/60Hz, SMPS |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | CTR-73 |
Dimension (HxWxD) mm | 70 X 60 X 110 |
Panel Cutout (mm) | Din Rail |
Features | Single Input - Single Output Single Input - Dual Output |
Isolation Type | Optical Type, 3 way (Input - Output, Output - Supply, Input - Supply) 1.2 kVA |
INPUT | |
Input Signal | 0~5A AC, 0-10A AC |
OUTPUT | |
Control output | 0-20mA / 4-20mA / 0-10V DC ( Single or Dual Output) (Factory Set) |
SPECIFICATION | |
Accuracy | ±0.5% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Enclosure Material | Plastic |
Operating Ambient Temp | 0°C - 55°C |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MFC-3006 |
Dimension (HxWxD) mm | 48 X 96 X 120 |
Panel Cutout (mm) | 44 x 92 |
Display | Single Display: 7 segment, 6 digit, 0.4”, RED LED display- Total Flow |
Lower : 7 segment, 4 digit, 0.4”, GREEN LED - Flow Rate | |
INPUT | |
Input Signal | 4-20 mA DC / 0-10V DC / Pulse (Factory Set) |
SPECIFICATION | |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50Hz |
Indication | LED for Relay Status Indication |
Enclosure Material | Metal |
*Your information is safe with us.
MODEL | CC - 73 |
Dimension (HxWxD) mm | 70 X 60 X 110 |
Panel Cutout (mm) | |
Display | Single Display: 7 segment, 4 digit, 0.4”, RED LED display |
INPUT | |
Input | 0 to 5A AC / 0 to 10A AC (Factory Set) |
CT Selection | 0 to 10A AC through Direct, CT / 0 to 5A AC through Direct CT/ CT Selection |
OUTPUT | |
Control Action | 1 - Relay / SSR |
Relay Ratings | 1C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
SPECIFICATION | |
Resolution | 0.1ºC |
Accuracy | ±1% of FSD |
Power Supply | 230 V AC, ±10 %, 50 Hz (linear power supply) |
Indication | LED for Relay Status Indication when relay is switched ON |
Enclosure Material | Plastic / DIN Rail mounting |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
Model | TC-192AL |
Dimension (HxWxD) mm | 96 X 96 X 50 |
Panel Cutout (mm) | 92 X 92 |
Display | Single Display: 7 segment, 4-Digit, 0.56”, RED LED |
Input | |
Sensor | J / K / PT-100 2W/3W (Factory Set ) |
Range | J(0ºC to 400ºC 0ºC to 600ºC), K(0ºC to 1200ºC), PT-100 2W/3W((0ºC to 400ºC, - 50.0ºC to 200.0ºC) |
Output | |
Control Output | 1C/O, 5A, 230V AC |
Relay Ratings | 24 V DC APPORX |
Specification | |
Set Point | 1 - Set Point |
Control Action | Time Proportional / ON-OFF (Factory Set) |
Operating Mode 1 | HEAT + COOL +ADVANCE ALARM |
Resolution | “J K - 1°C Fix, PT 100 2W/3W - 0.1°C/1°C “ |
Accuracy | ±1% of FSD |
Power Supply | 230V AC, ±10%, 50Hz |
Indication | Relay turns OFF in case of sensor break |
“OPEN” message display for sensor break LED for relay status Indication | |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | PI-192 |
Dimension (HxWxD) mm | 96 X 192 X 100 |
Panel Cutout (mm) | 92 X 188 |
Display | Single Display: 7 segment, 4 digit, 4 1/2”, RED LED display |
INPUT | |
Input 1 | 0-10V DC / 4-20mA / 0-20mA (Configurable) Programmable / DP (Configurable) |
Input 2 | Pulse - Through Encoder / Proximity |
Range | 0 - 9999 |
OUTPUT | |
Control Output | 2 Relay for Alaram |
Relay Ratings | 1C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Excitation | 24V DC |
Extra Features | |
SPECIFICATION | |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10 %, 50 Hz (linear power supply) / SMPS |
Protection | Relay turns OFF in case of sensor break |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
*Your information is safe with us.
MODEL | PIC-6004 |
Dimension (HxWxD) mm | 160 X 380 X 50 |
Panel Cutout (mm) | |
Display | Single Display: 7 segment, 4 digit, 4 1/2”, RED LED display |
INPUT | |
Input 1 | 0-10V DC / 4-20mA / 0-20mA (Configurable) Programmable / DP (Configurable) |
Input 2 | Pulse - Through Encoder / Proximity |
Range | 0 - 9999 |
OUTPUT | |
Control Output | 2 Relay for Alaram |
Relay Ratings | 1C/O, 5A, 230V AC |
SSR / Buzzer | 12V DC approximately |
Excitation | 24V DC |
Extra Features | |
SPECIFICATION | |
Resolution | 0.000 / 00.00 / 000.0 / 0000 (Configurable) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10 %, 50 Hz (linear power supply) / SMPS |
Protection | Relay turns OFF in case of sensor break |
Indication | “OVER” - If Input Signal is more than Maximum Input “LOW” - If Input Signal is less than Minimum Input “0000” - If there is No Input Signal |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |