We offer a wide range of Temperature Calibration which is accessed with high performance. Our ranges of products have the salient features like durable dimensionally precise, longer service life, corrosion resistant and easy operation. These meter calibrations are widely appreciated for their supreme quality and they require less maintenance. This temperature calibration includes Temperature Controller Calibration, Micro Controller Calibration, Temperature Gauge Calibration, Temperature Controller / Indicator Calibration, Digital Thermometer Instruments Calibration, Process Controller Calibration etc.
Minimum Order Quantity | 1 Sample |
Service Location | india |
*Your information is safe with us.
MODEL | TI - 413 |
Dimension (HxWxD) mm | 48 X 48 X 70 |
Panel Cutout (mm) | 44 x 44 |
Display | Single display: 7 segment, 3 digit, 0.56”, RED LED display. |
INPUT | |
Sensor | J (0ºC to 400ºC or |
Range | 600ºC), K (0ºC to 999ºC), PT-100 2W/3W(0ºC to 400ºC, -50ºC to 400ºC) |
SPECIFICATION | |
Resolution | J , K , PT-100 2W/3W 1ºC |
Accuracy | ±1% of FSD |
Power Supply | 90 - 270V AC/DC, 50/60Hz, SMPS |
Indication | “OPEN” message is displayed if sensor is disconnected |
Enclosure Material | Plastic |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
MODEL | MDC-1901 |
Dimension (HxWxD) mm | 96 X 96 X 100 |
Panel Cutout (mm) | 92x92 |
Display | Single display: 7 segment, 3 ½ digit, 0.56”, RED LED display. |
INPUT | |
Sensor | J / K / R / PT-100 2W/3W (Factory Set) |
Range | J (0ºC TO 400ºC) or K (0ºC TO 1200ºC) or R (0ºC TO 1600ºC) PT-100 2W / 3W (0ºC TO 400ºC or 0.0ºC TO 199.9ºC or -50.0ºC to 199.9 ºC) |
OUTPUT | |
Relay Ratings | 1 C/O, 5A, 230V AC |
SSR / BUZZER | 24V DC approximately |
SPECIFICATION | |
Setting | PUSH TO SET by Screw Driver (Potentiomatric) |
Set Point | 1 - Set Point |
Control Action | Time Proportional (TP) / ON-OFF (Factory set) |
Operating Mode | HEAT Mode |
Resolution | 1ºC Fix (0.1ºC factory set less than 200ºC) |
Accuracy | ±1% of FSD |
Power Supply | 230V AC ±10%, 50 HZ |
Protection | Relay Turns OFF in case of Sensor is disconnected |
Indication | LED for Relay Status Indication Sensor Break |
Enclosure Material | Metal |
Operating Ambient Temp | 0ºC - 55ºC |
Relative Humidity | Upto 95% RH Non Condensing |
NOTE: | “* 2 Set points are available in Model MDC-1902, MDC-1901AL MDC-2902 . |
Relay Action is H+C MODE , H+H MODE (Factory Set), 2nd Set Point relative to Main Set Point. | |
Note : H = HEAT, C=COOL” | |
R Type 1600 ºC availabe in MDC-1901 | |
*Your information is safe with us.